I also sprayed the base but left the brass visible to highlight the mechanics of the model and hit to its purpose. The minors came together and I laser cut a stand to display them on using an illustrator file traced from my scaled drawings. To hold the model on his waist two holes and some twisted wire running through keeps the front and back attached. For the feet they are interlocking triangles on each foot.
0 Comments
With my moulds laid up I poured the silicone on for the first halves using typical silicone pouring practice. As the moulds were all small (apart from the body) I used small containers and mixed up lots of smaller batches that would then be written on the side of the batch number and the time it was mixed so I can keep track of what order the pieces would be curing in.
|
Third Year
|